This paper introduces a digital current-programmed control for multiphase buck VRM for high-performance loads that regulates the output voltage with high accuracy, maintains current sharing of all phases for the entire operation range, and achieves optimal transient recovery for load transients. These are enabled by hybrid controller architecture that facilitates per-phase average current control (ACM) for steady-state operation and a state-space based transient oriented controller that executes time-optimal or minimum-deviation recovery for loading and unloading transients. Active voltage positioning (AVP) as well as current sharing algorithms are embedded, covering all the required features to supply modern high-end loads. The resultant compact controller (implemented on FPGA with total logic element count of 1700 elements for 4 phases) has been tested and successfully validated experimentally on Intel-certified hardware. The experimental prototype featured a 4-phase 12V to 1.xV buck VRM that drives an array of 7 DDR4 load modules, accommodating 100A load transients with transition rate of 1000A/Âµs, and demonstrating time-optimal recovery.