Type here to filter the list

Monday, Nov 4
3:00 pm

Novel REPRESENTATIVE Downscale Model Concept for Freezing and Thawing Processes

Location: Presentation Room 1, Exhibit Hall 2, 3 and 4
Karoline B. Bechtold-Peters, PhD – Novartis. Pharma AG
Monday, Nov 4
3:00 pm

Rapid Fire: Manufacturing and Bioprocessing

Location: Presentation Room 1, Exhibit Hall 2, 3 and 4
Nivedita Shetty, PhD – Genentech; Koyel Sen, MS – University of Connecticut
Monday, Nov 4
3:15 pm

New Freezer-Thawer Design enabling controlled F/T of large Biologics DS

Location: Presentation Room 1, Exhibit Hall 2, 3 and 4
Karoline B. Bechtold-Peters, PhD – Novartis. Pharma AG
Monday, Nov 4
3:30 pm

Performance Data from Closed Robotic Filling Systems for Biopharmaceutical Manufacturing

Location: Presentation Room 1, Exhibit Hall 2, 3 and 4
Craig Rathe – Vanrx Pharmasystems
Monday, Nov 4
3:45 pm

Heat Flux Sensor to Create Design Space in Primary Drying

Location: Presentation Room 1, Exhibit Hall 2, 3 and 4
Matthias Lucke – Coriolis Pharma
Monday, Nov 4
4:00 pm

A Novel Microfluidic Solution for Developing and Manufacturing Transformative Nanomedicines

Location: Presentation Room 1, Exhibit Hall 2, 3 and 4
Tim Leaver, BASc – Precision NanoSystems Inc.
Monday, Nov 4
4:15 pm

Monitoring Patient Immune Response to Host Cell Protein (HCP) Impurities

Location: Presentation Room 1, Exhibit Hall 2, 3 and 4
Fengqiang Wang, PhD, MS – Merck and Co Inc
Monday, Nov 4
4:30 pm

Container Closure Integrity & Annex 1 GMP

Location: Presentation Room 1, Exhibit Hall 2, 3 and 4
Atanas Koulov, PhD – Lonza AG
Tuesday, Nov 5
3:00 pm

Continuous Manufacturing in Development Business considerations and Evolution of a Minibatch Direct Compression concept

Location: Presentation Room 1, Exhibit Hall 2, 3 and 4
Siddharthya Mujumdar, Ph.D. – Roche
Tuesday, Nov 5
3:00 pm

Rapid Fire: Manufacturing and Bioprocessing

Location: Presentation Room 1, Exhibit Hall 2, 3 and 4
Wei Zhang, PhD – Genentech Inc.; Suyang Wu, MS – Duquesne University
Tuesday, Nov 5
3:15 pm

Continuous Mixing of Film Precursor containing Engineered Particles

Location: Presentation Room 1, Exhibit Hall 2, 3 and 4
Guluzar Gorkem Buyukgoz, PhD candidate – NJIT
Tuesday, Nov 5
3:30 pm

Converting Batch to Continuous: Production of Pharmaceutical Nanoparticles by Supercritical-crystallization.

Location: Presentation Room 1, Exhibit Hall 2, 3 and 4
Barry Long, BSc – University of Limerick
Tuesday, Nov 5
3:45 pm

Paclitaxel-Loaded Polymeric-Micelles Produced via Co-Axial Jet-in Co-flow Continuous Processing Technology

Location: Presentation Room 1, Exhibit Hall 2, 3 and 4
Anand Gupta, MS – University of Connecticut
Tuesday, Nov 5
4:00 pm

Effect of manufacturing methods on amorphous solid dispersion properties

Location: Presentation Room 1, Exhibit Hall 2, 3 and 4
Sonal V. Bhujbal, MS – Purdue University
Tuesday, Nov 5
4:15 pm

The Importance of Excipient Material Attributes in Continuous Manufacturing

Location: Presentation Room 1, Exhibit Hall 2, 3 and 4
Yeli Zhang, PhD – Dupont
Tuesday, Nov 5
4:30 pm

DoE with Process Automation: New Approach to Quality by Design

Location: Presentation Room 1, Exhibit Hall 2, 3 and 4
Thomas Brinz, PhD – Robert Bosch Packaging Technology GmbH
Tuesday, Nov 5
4:45 pm

A Flexible Future: Strategic Advances in Flexible Pharmaceutical Manufacturing

Location: Presentation Room 1, Exhibit Hall 2, 3 and 4
Allen C. Templeton, PhD – Merck
Wednesday, Nov 6
3:00 pm

Spatially Offset Raman Spectroscopy- Raman Verification Through Barrier

Location: Presentation Room 1, Exhibit Hall 4
Matthew Bloomfield, BSc, MSc, PhD – Agilent Technologies
Wednesday, Nov 6
3:00 pm

Rapid Fire: Manufacturing and Bioprocessing

Location: Presentation Room 1, Exhibit Hall 4
Ahmad Almaya, PhD – Eli Lilly and Company; Ebenezer O. Ojo, MSc, PhD, – University of Strathclyde
Wednesday, Nov 6
3:15 pm

Dry Amorphization Using a Twin-Screw Process

Location: Presentation Room 1, Exhibit Hall 4
Andrei Winkler, MSc, MBA – Thermo Fisher Scientific
Wednesday, Nov 6
3:30 pm

3D Printing for Pharmaceuticals: it's more than FDM

Location: Presentation Room 1, Exhibit Hall 4
Carolin Auch – Merck KGaA
Wednesday, Nov 6
3:45 pm

Formulation Development of Inkjet-based 3D Printed Tablets

Location: Presentation Room 1, Exhibit Hall 4
Koyel Sen, MS – University of Connecticut
Wednesday, Nov 6
4:00 pm

3D Printing in Precision Combination Therapy of Cardiovascular Polypills

Location: Presentation Room 1, Exhibit Hall 4
Alaadin Alayoubi, PhD – US Food and Drug Administration
Wednesday, Nov 6
4:15 pm

COMMAND Nanotechnology – One step nanomedicine manufacturing platform

Location: Presentation Room 1, Exhibit Hall 4
Bingyuan Lu, PhD – Queen's University Belfast
Wednesday, Nov 6
4:30 pm

Addition of Colloidal Silicon Dioxide to Enhance Secondary Drying Process

Location: Presentation Room 1, Exhibit Hall 4
Yung-Chi Lee, PhD – Merck and Co Inc
Wednesday, Nov 6
4:45 pm

Cryptopharmaceuticals - Blockchain of Pharmaceutical Products

Location: Presentation Room 1, Exhibit Hall 4
Johan P. Boetker, PhD – University of Copenhagen