WS3 - Nondestructive Evaluation Methods for Historic Structures Workshop, Part 2

Sunday, September 23
8:00 AM - 4:30 PM
Location: Buffalo Central Terminal - 495 Paderewski Dr, Buffalo, NY 14212

The use of non-destructive evaluation (NDE) in the assessment of heritage structures is extremely effective in obtaining critical information regarding a building’s structural arrangement and condition. All this can be achieved, while minimizing disruption to the historic fabric. Some preservationists, architects and engineers however, who are unfamiliar with the technologies available may be less inclined to use them due to a lack of education on the subject, and, in some cases, due to a lack of confidence in the results. You no longer are limited to expensive solutions like major rebuilds of masonry walls or intrusive interventions like grout injection or epoxy anchors without knowing the actual internal wall conditions or projected outcomes you can get the detailed information you want and just repair the actual problem area.

NDE of buildings and structures in a very broad sense is the act of understanding how energy behaves (be it light, heat, sound, current vibration, or other) when directed at or passed through a building material or component. Correctly interpreting data collected from techniques that use this energy, such as Ground Penetrating Radar (GPR), Infrared Thermal Imaging, Metal Detection and Ultrasonics is the key to a successful investigation that will ultimately help a project team fully understand their building and design the most appropriate repairs.

The purpose of this 2-day workshop is to explore the most effective NDE technique combinations, provide attendees a hands-on opportunity to experimentation with NDE equipment, and attempt to eliminate some of the confusion and mystery that frequently surrounds the world of NDE.

Day One of the workshop will be held at The Willowbank School in Queenston, Ontario – an impressive 1830s Greek Revival mansion perched above the Niagara River which is the focus of the Willowbank Centre. Day Two takes you to the Buffalo Central Terminal, one of the largest Art Deco train stations in the country, currently on the 2018 World Monument Watch List.

Day 2
Bus Departs: 7:30am
Break: 10:30 - 10:45am
Lunch: 12:00 - 1:00pm
Demos: 2:30 - 5:30pm (15min break in between)

7:30 to 8:00 - Travel to Central Terminal Buffalo

8:00 start day with welcome and introduction to site by Paul Lang, announcements and housekeeping by Tim Crowe

8.15 - 9.15 - Gina Crevello - Segment on corrosion diagnostics and condition state modeling. Other NDE tools and their relevance to corrosion investigations will also be presented and discussed.

9.15 – 10.15 - Joshua Freedland - Field applications of XRF, microscopy. Or other site appropriate topics

10:30 - 12:00 Field Session: Assessment of a Masonry structure (Brick over terracotta speed tile)
Demonstrators: Charles Bransby-Zachary / Gina Crevello / Joshua Freedland

12:00 - 1:00 Lunch

1:00 - 2:30 Field Session: Assessment of a Reinforced Concrete structure - Also include mapping of embedded structural framing / reinforcement
Demonstrators: Charles Bransby-Zachary / Gina Crevello / Joshua Freedland

2:30 - 2:45 - Break

2:45 - 4:15 Panel Session for Q&A and linkages between presentations / field sessions
Panel discussions lead by session coordinators / primary speakers.
Intent is to develop preservation strategies with NDE awareness moving forward

4:15 PM close Day 2

4:30 PM - travel back to hotel/Babeville/Asbury Hall for the 5:00PM opening Keynote
Ashbury Hall/ Babeville, 341 Delaware Ave, Buffalo, NY 14202, USA

This course qualifies for HSW credit with AIA, ASLA and RCEP.

Learning Objectives:

Tim M. Crowe

Associate Principal
Wiss, Janney, Elstner Associates, Inc.

Timothy Crowe is a licensed architect and or structural engineer with Wiss, Janney Elstner, Associates, Inc., in Northbrook Illinois, and serves as Co-Chairman of the APT Preservation Engineering Technical Committee. He has performed hundreds of evaluations of building structures and cladding systems to address material or system deficiencies. Evaluations have included failure analyses and reinforcing and/or restoration of existing structural systems including timber, concrete, masonry, and steel structures. He has supervised projects through construction observation services for buildings ranging from churches to high-rise office towers.


Send Email for Tim Crowe

Scott Tripp

Managing Director
Tripp Heritage Solutions

Vice Chair, APT 2018 Conference


Send Email for Scott Tripp

Charles Bransby-Zachary, BSc, MRICS


Charles Bransby-Zachary has over 20 years of experience in Building Assessment and is regarded as an international expert in the field of Non-Destructive Evaluation [NDE]. He has conducted a wide range of investigations and conservation projects for prominent buildings across the USA and England. Mr. Bransby-Zachary graduated from De Montfort University [Leicester], England with a Construction Technology & Management degree in 1996, embarking on his NDE career with a solid knowledge of construction practices and management.

Mr. Bransby-Zachary’s project experience is far-reaching and ranges from complex water intrusion work at the Chrysler Building to detailed construction & condition assessments for the US Capitol, Washington DC and several other US State Capital buildings. Mr. Bransby-Zachary is a Board member of the Association for Preservation Technology, NE Chapter (APTNE) and a Professional Member of the Royal Institute of Chartered Surveyors [MRICS].


Send Email for Charles Bransby-Zachary

Michael Schuller, P.E. FTMS FAPT

Atkinson-Noland and Associates

Michael Schuller is president of Atkinson-Noland & Associates, a consulting engineering firm specializing in evaluation and repair of existing structures. He has 30 years’ experience with masonry engineering including special expertise with nondestructive evaluation and repair procedures. He has over 100 publications on concrete and masonry including a book titled “Nondestructive Evaluation and Testing of Masonry Structures” and taught Masonry Structural Design at the University of Colorado in Boulder from 1999 through 2009 and in 2016. Mr. Schuller serves on the Board of Directors of The Rocky Mountain Masonry Institute and The Masonry Society and is a Fellow of The Masonry Society and the Association for Preservation Technology.


Send Email for Michael Schuller

Lyse Blanchet, M.Sc., Eng.

Heritage Conservation Services

Structural Engineer with a Master Degree in Wood Science and Technology, and postgraduate studies in the conservation of built heritage. Over thirty years of experience in the heritage conservation field including twenty six years with Heritage Conservation Services (HCS) for Public Services and Procurement Canada (PSPC) as senior structural engineer advisor, and now as National Heritage Coordinator. Lyse has been in touch with evolving national and international heritage conservation practices; and more specifically, she has been involved with education and training in wood science and technology and with the development and applicability of codes, guidelines and standards. Led research projects: NDT for Wood; Modelling Traditional Timber Joints; New Approach for the Condition Assessment of Historic Timber Structures. She has been involved in numerous Design and Construction Projects across Canada as Project Team Leader, Design Manager, and Senior Quality Reviewer. Lyse is a member of the ICOMOS, the ICOMOS International Committee on Wood, the Canadian Association of Heritage Professionals and the Association for Preservation Technology International. Lyse delivers a five-day course at Willowbank School of Art, on the Structural Aspects of Cultural Heritage. She is the president of the ICOMOS International Committee on Training,


Send Email for Lyse Blanchet

Gina L. Crevello, MSc, Certificate in Conservation, Professional Associate AIC

Echem Consultants LLC

Gina Crevello is an architectural conservator and a professional associate (PA) of the American Institute of Conservation. She is principal of Echem Consultants LLC, a forensic, corrosion and material science consultancy. With 20 years’ experience, Gina has been working specifically in material diagnostics and durability engineering for more than a decade. Gina specializes in condition assessments, forensic investigations, corrosion diagnostics, material testing, and electrochemical design and repair solutions.


Send Email for Gina Crevello

Joshua Freedland, M.Sc.

Wiss, Janney, Elstner Associates, Inc.

Joshua Freedland is a Principal at Wiss, Janney, Elstner Associates Inc. and a long-standing member of APT has been involved in numerous architectural preservation and materials conservation projects. Mr. Freedland has his Masters of Science from the University of Pennsylvania. He is the past-Chair for the Architectural Specialty Group (ASG) of the American Institute for Conservation of Historic and Artistic Works (AIC) and a Professional Associate. He is an Associate Editor of the Journal of the American Institute for Conservation.


Send Email for Joshua Freedland


WS3 - Nondestructive Evaluation Methods for Historic Structures Workshop, Part 2

Attendees who have favorited this

Please enter your access key

The asset you are trying to access is locked. Please enter your access key to unlock.

Send Email for Nondestructive Evaluation Methods for Historic Structures Workshop, Part 2